In stock
Only %1 left
Hand made in the UK


Bleeding Fallout Remover


  • Reactive iron fallout remover
  • Acid-free alternative wheel cleaner
  • Breaks down brake dust and oils on contact
  • Up to 3:1 dilution rate
  • Concentrated formula makes it cost-effective with dilution
As low as £11.95 £9.96

1-2 Days Delivery

Bleeding Reactive Iron Fallout Remover, the hottest and most visually pleasing product to grace the detailing community in recent years. Ferrous contamination causes a major problem in the world of detailing, tiny particles of iron fallout (commonly seen from industrial/rail fallout and brake dust) are deposited on your vehicle and become embedded into the delicate surface. These small iron particles become bonded to the surface, slowly corroding and can prove difficult to remove with normal cleaning, this has a visual effect if left to build up and can cause damage to the surface itself in extreme cases.

AutoGlanz Blood Tonic is an advanced, reactive gel-based fallout remover formula that specifically targets only the outer rusty shell of bonded ferrous particles and works at safely dissolving the contaminant to release it from the surface so it can be swilled away with regular wash routine in a safe manner. Blood Tonic is suitable for use on all exterior surfaces including, paintwork, aluminium, stainless steel, magnesium, chrome, anodised finishes, glass, plastic trims and even rubber. When used in its neat form, Blood Tonic’s added blend of degreasing agents also helps to loosen everyday grime making it a brilliant single stage wheel cleaner.

Blood Tonic also has the added benefit of being LSP/wax safe, when diluted 3:1 with water, the mixture will go a long way towards keeping the build-up of fallout at bay, if used on a more regular bases, this 3:1 dilution makes Blood Tonic one of the most cost-effective fallout removers on the market today. Traditionally a bleeding reactive iron fallout remover tends to naturally have a rotten smell due to the nature of the chemical formula, we have added a cranberry fragrance to Blood Tonic which helps mask the naturally occurring odour and improve your user experience.

How to

  1. Use a suitable wash method to remove loose soiling.
  2. Shake well before use and spray Blood Tonic evenly onto the surface to be treated at the correct dilution rate ( most effective on a dry surface).
  3. Allow to dwell for a few moments and watch the formula get to work as it changes colour in areas that are affected by ferrous contamination.
  4. Rinse thoroughly with high-pressure wash.

Do not allow the product to dry on the surface

Caution must be taken when used in direct sunlight as the product will dry out quicker and could cause non-permanent staining.

Dilution rates

Wheels – neat

Decontamination washes – neat/1:1

Maintenance washes – 3:1

Can strip LSPs when used neat for continuous periods.

See What Others Think

Don't take our word for it, we have happy customers all around the world. Still not convinced, feel free to scroll through all our non bias reviews to see what others just like you think of our amazing range of detailing products. Have you purchased a product and enjoyed it? Why not share your positive vibes with others by hitting that review button

Order arrived on time

This product makes cleaning wheels easy!! Would highly recommend for the ocd car detailers out there!!

Phillip McCallion

2nd time ordering, won't be the last

Very good product. Gives enough abrasion to remove fallout with ease without harming the alloys. I also use this product on painted alloys and does not harm them at all.

Pablo Huerta Castañeda

so happy with my purchase

it lacks strength

Scott I Sheldon

can't believe how good these products are!

Best wheel cleaner I’ve used

Matthew D Round

Order arrived on time

quick working and helps with the wheel cleaning a lot! does say it can be diluted but doesn't give directions that i saw, this would be a good idea as my wheels dont gather too much fallout so seems a bit excessive as concentrated. but over all very pleased with the product

Sam J Spencer

the smell is amazing

Really good for removing brake dust etc before washing the wheel more thoroughly after.

Dan C Ellis


This stuff is very effective even when diluted 3-1 it works a treat on all wheels and really takes off all the hard dirt that washings doesnt do

Mark Mcnally

would suggest to anyone!!

Great product. Works brilliantly and is very dilutable so goes along way. Amazing value for money. Would recommend it to anyone

8 Reviews
View FAQ