Soft Finish Pad

Soft Finish Pad is the obvious choice for polishing clear lacquer where you want the gloss raised to the highest level - possibly after a more severe paint correction where there are still holograms in the lacquer. The pad is made of heat-resistant foam, which is why it does not become soft in the same way as a traditional polishing pad. This makes it harder for the pad to deform and the smaller heat build-up ensures a durability of 5-6 times longer than ordinary foam polishing pads. These pads have a trapezoid shape and slightly rounded edges. It provides good stability and utilization of the jaws of the dual action polishing machine - also good flexibility on curved and angular vehicle parts. 

Price per PCS. (Polishing discs in 1.4 & 2.2¨ sold exclusively in 5-packs)

Soft - but hardly that soft

With our soft pads, we at Auto Glanz have chosen to go in a direction where you get a pad that is soft enough for gloss polishing - but still has enough bite to remove holograms from rougher polishing. 

As a professional, you probably know that after coarser polishing with either wool or microfiber - the scratches have been removed, but you still have some sanding marks and holograms. Many fine polishing pads tend to be too soft for that. In this case, it requires more polish to get a final result. Contrary to the Soft Finish Pad here, you can achieve hologram removal - even very very fine holograms.

Heat resistant

We use heat-resistant or thermo-resistant foam on our polishing pads. Usually, a traditional foam pad loses 60-80% of its grinding power when heat is applied to it - this does not happen in nearly the same way with our heat-resistant polishing pads. Our pads will maintain their grinding power, even with repeated polishing steps. At the same time, the polishing pad will last 5-6 times longer than traditional foam polishing pads. 

Maintenance:

We recommend blowing the pad after each pass with a tornado gun. And occasionally clean it via a pad washer. 

Polishing should be done with 1-2 pads in rotation. Polish half a panel or half a door - and switch to a cleaned and cooled pad. 

Clean, cooled pads grind better and last longer.