Overview

• Can be used on all exterior surfaces.
• Dilutable up to 3:1.
• LSP safe when used at higher dilution.

Description

Blood Tonic - Bleeding Fallout Remover

Bleeding Reactive Iron Fallout Remover, the hottest and most visually pleasing product to grace the detailing community in recent years. Ferrous contamination causes a major problem in the world of detailing, tiny particles of iron fallout (commonly seen from industrial/rail fallout and brake dust) are deposited on your vehicle and become embedded into the delicate surface. These small iron particles become bonded to the surface, slowly corroding and can prove difficult to remove with normal cleaning, this has a visual effect if left to build up and can cause damage to the surface itself in extreme cases.

Auto Glanz Blood Tonic is an advanced, reactive gel-based fallout remover formula that specifically targets only the outer rusty shell of bonded ferrous particles and works at safely dissolving the contaminant to release it from the surface so it can be swilled away with regular wash routine in a safe manner. Blood Tonic is suitable for use on all exterior surfaces including, paintwork, aluminium, stainless steel, magnesium, chrome, anodised finishes, glass, plastic trims and even rubber. When used in its neat form, Blood Tonic’s added blend of degreasing agents also helps to loosen everyday grime making it a brilliant single stage wheel cleaner.

Blood Tonic also has the added benefit of being LSP/wax safe, when diluted 3:1 with water, the mixture will go a long way towards keeping the build-up of fallout at bay, if used on a more regular bases, this 3:1 dilution makes Blood Tonic one of the most cost-effective fallout removers on the market today. Traditionally a bleeding reactive iron fallout remover tends to naturally have a rotten smell due to the nature of the chemical formula, we have added a cranberry fragrance to Blood Tonic which helps mask the naturally occurring odour and improve your user experience.

How To Guide:

1. Use a suitable wash method to remove loose soiling.
2. Shake well before use and spray Blood Tonic evenly onto the surface to be treated at the correct dilution rate ( most effective on a dry surface).
3. Allow to dwell for a few moments and watch the formula get to work as it changes colour in areas that are affected by ferrous contamination.
4. Rinse thoroughly with high pressure wash.

Do not allow the product to dry on the surface

Caution must be taken when used in direct sunlight as the product will dry out quicker and could cause non-permanent staining.

Dilution rates

• Wheels – neat
• Decontamination washes – neat/1:1
• Maintenance washes – 3:1

Can strip LSPs when used neat for continuous periods.