All Year Pre-Wash Bundle

With our Pre-wash Package, we have packed in all you need to pre-wash your car no matter what season you are in.

From winter pre-wash products such as Brute or Spritzer to a gentle Snow foam such as Piste.

Please note that some of the products need to be used in a foam lance for a high-pressure washer or foam sprayers sold separately. 

Pre-wash - ideal before physical contact with the paint

When we pre-wash our car, we loosen or soften the dirt on the paint.

This means we avoid rubbing unnecessarily on the dirt and therefore scratching our car when washing it during the contact wash phase.

READ ALSO: Safe Wash Guide

In summer, it's typically insects and dust we need to remove in the pre-wash phase - and in winter, salt and dirt kicked up onto the car from the road.

Since the dirt varies throughout the year, you need different sets of products to help you safely through.

The All Year Bundle Contains

• Bug Off Insect Remover (500 ml)
• Piste pH-neutral Foam Pre-wash (500 ml)
• Brute Traffic Film Remover (500 ml)
• Empty Spray Bottle for Mixing Brute
• Spritzer Citrus Pre-Wash (500 ml)
• Multi Degreaser ( For Along Door Shuts, Window Seals etc) (500 ml)
• 2 Super Soft Brushes

How To Guide

Here is the guide for summer and winter use:

For summer

• Apply Bug Off Insect Remover to exposed areas
• Apply Multi in door shuts, along window seals, etc.
• Mix 50-150 ml of Piste in your foam lance and fill with warm water
• Apply the foam over the entire car (including on top of the insect remover)
• While the foam is on the paint, use the super soft brushes to agitate hard-to-reach areas, window seals, etc.
• Let it all sit for as long as possible without drying out
• Rinse off thoroughly with plenty of water
• Finally, rinse door shuts thoroughly
• Then proceed to hand wash your car

For Winter

• Dilute Brute with 50 ml of product to 450 ml of water in the empty bottle. (Make sure to empty the bottle after use, and rinse the spray head with water)
• Apply Brute to all the dirty areas of the car
• Apply Multi in door shuts, along window seals, etc.
• Mix 50-150 ml of Spritzer in your foam lance and fill with warm water.
• Apply Spritzer over the entire car (including on top of Brute)
• While the foam is on the paint, use included brushes to agitate hard-to-reach areas, window seals, etc.
• Let it all sit for as long as possible without drying out
• Rinse off thoroughly with plenty of water
• Finally, rinse door shuts thoroughly
• Then proceed to hand wash your car